Chopperworks Rocker C
Article About Parts Contact

Parts for Harley Davidson® Rocker C Motorcycles

Heartland USA

“Heartland USA is committed to developing, producing and distributing
high-end design solutions that transform factory H-D Soft-tails into full on custom cycles."

Heartland USA E-Z Rocker Wide Tyre Kit

Heartland USA Rear Fenders

The E-Z Rock-R adapts the Heartland look to an already stylish bike by adding a Leather solo seat, Billet struts finished in Chrome or Satin Chrome powder coat, 11" wide steel fender to cover the 240 mm stock tyre and a Steel rock guard. This conversion allows you to use Heartland’s patented second seat and The Ride, Rack and Rest. 2008-Plus FXCW and FXCWC

Heartland USA Rock-n-Bobber

The Rock-N Bobber gives your Rocker® that True Bobber look and feel. The Rock-N Bobber can be built in either Stage One: Replaces the seat with a Leather spring seat and a pan cover, Stage Two: Is Stage I and also replaces the Fender, Plate holder and Rear lights. With both stages added to the bike you get that Total Bobber look.

Heartland USA Rocker Accessories

Trask Performance

World's Best Turbo Systems and Accessories

Trask Performance

Designed for 2000 and later EFI Twin Cam Softails. The TRASK TURBOCHARGER will provide these bikes with arm pulling power. You will be looking at dyno numbers between 100 - 120 HP and 100 - 120 TQ. The system is supplied as a complete performance package including a patent pending precision billet plenum and snap in Venturi that creates 100% unobstructed air flow, a modified Garrett GT turbo, black ceramic coated sport pipes, and a set of high flow injectors.

The easy to follow instructional CD comes with all tuning maps needed. This system requires the use of a tuning module (not supplied).

 

Independent Cycle Inc - Legend Air Suspensions

Legend Air - Rocker L2

NEW IMPROVED DESIGN

• Fits all Harley Davidson® and aftermarket Softail® chassis
• Fits 00-09 FXST/FLST
• CNC machined 6061-T6 billet aluminum
• Suspension system installs in stock location, no modifications necessary
• Available in Machined, Black Anodized or Chrome Finish
• Unlimited one year warranty
• Made in the USA

Systems include:

- Micro toggle switch
- On-board air compressor
- Solenoid valve
- All necessary hardware

 

Legend Air - Rocker L3

NEW IMPROVED DESIGN

• Fits all Harley Davidson® and aftermarket Softail® chassis
• Fits 00-09 FXST/FLST
• CNC machined 6061-T6 billet aluminum
• Suspension system installs in stock location, no modifications necessary
• NEW colour coded plug and play wiring allows for a quick and easy installation
• NEW rider friendly switch for easy ‘on the go’ adjustability
• Unlimited one year warranty
• Made in the USA

 

Systems include:

- Black handlebar mounted control
- On-board air compressor
- Solenoid value
- All necessary hardware
UPGRADE: Chrome handlebar switch available separately

 

Colorado Custom Cycle Wheels

Prominent Billet Road Wheel Company

Colorado Custom Cycle Wheels

Ride Wright Wheels

Premium Spoke Wheels - Choice of ChampionsRide Wright Wheels - Rocker Spoke Wheels

 

Spoked wheels have come a long way since they were first made out of wood for use on carts, chariots, horse-drawn carriages/buggies, bicycles, and early automobiles. When it was first invented, the sole purpose of the spoked wheel was to make vehicles lighter and swifter, thus making it easier to transport objects and/or people from one place to another. While it’s impossible to re-invent the wheel, innovation and advances in technology have enabled the creation of spoked wheels that are not only much stronger and more reliable, but aesthetically pleasing as well.

If there’s one thing Harley-Davidson enthusiasts can agree on, it’s that spoked wheels look good on just about any bike. One person who definitely likes the look of spoked wheels is Sam Wakim, the owner of Ride Wright Wheels in Anaheim, CA. Sam has been in the wheel business for more than 10 years, and while he likes the gleam of a traditional spoked, chromed wheel just as much as the next guy, in his world of wheels, Sam wonders, “Why limit yourself to just one color or style when there’s a whole rainbow of colors and several styles to choose from?”

Ride Wright’s selection varies from the standard cross-laced 40-, 60-, 80-, and 120-spoke wheels with 3/16-inch-diameter solid stainless-steel spokes in traditional round, twisted, or diamond-cut spokes. Rim sizes vary from 16 to 21 inches in diameter and come in various widths, all the way up to 14 inches for 360mm tires. When it comes to colors, the sky is the limit. Ride Wright offers its wheels in any powdercoat color combination you can think of, from red spokes, hub, and nipples to one white spoke with 59 black spokes, matched to a green hub and a rainbow of nipples.

For all those who feel bigger is better, one of the hottest wheels Ride Wright offers is its 50-spoke Fat Daddy wheel. The wheels are highlighted by solid stainless-steel 3/8-inch spokes. Aside from the fat spokes, the way the wheels are laced gets a lot of attention as well. The spokes run straight out from the hub to the rim in a radial-lace fashion, as opposed to the more traditional cross-lace pattern in which the spoke exits the hub at an angle crossing over several other spokes.

While cross-lacing makes for a very strong and dependable wheel, Sam’s Fat Daddy wheels were developed and dyno-tested to be just as tough and reliable. In fact, the wheels are so tough, they’ve stood up to the abuse of AHDRA drag racer Valerie Thompson hammering the throttle on her daily rider, a 107ci ‘00 Fat Boy with 18-inch Fat Daddys. These wheels caught our attention, and since Sam’s shop is right in our backyard, we popped over to see how they’re built.

head office / show room
QUEENSLAND

ABN: 31 112 750 268

210 Days Road
Grange 4051
Queensland, AUSTRALIA

Phone: (07) 3356 6107
Fax: (07) 3356 0177

contact@chopperworks.com.au

service and Enhancement centre
A.C.T.

ABN: 97 634 301 384

3/18 Whyalla Street
Fyshwick 2609
A.C.T., AUSTRALIA

Phone: (02) 6280 6000
Fax: (02) 6280 6107

contact@chopperworks-act.com.au

service and Enhancement centre
QUEENSLAND

ABN: 31 112 750 268

5/11 Hayward Street
Stafford 4053
Queensland, AUSTRALIA

Phone: (07) 3356 6107
Fax: (07) 3352 3414

contact@chopperworks.com.au

This website is owned and operated by Chopperworks® Pty Ltd. Australian and international copyright law protects all information such as text, graphics, images, icons and other material on this web site. You may not copy or modify any part of the material contained on this web site, unless provided with written authorisation from us. All names, logos and trademarks in this site are the property of Chopperworks® Pty Ltd or their respective owners.

Copyright in this web site (including text, graphics, logos, icons, sound recordings and software) is owned or licensed by us. Other than for the purposes of, and subject to, the conditions prescribed under the Copyright Act 1968 and similar legislation which applies in your location, and except as expressly authorised by these terms and conditions, you may not by any form or any means:

  • Adapt, reproduce, store, distribute, print, display, perform, publish or create derivative works from any part of this web site;

  • Commercialise any information, products or services obtained from any part of this web site without written permission.

Except where otherwise specified, any word or device to which is attached the TM or R symbol is a registered trademark. If you use any of our trademarks in reference to our activities, products or services, you must include a statement attributing that trademark to us. You must not use any of our trademarks:

  • in or as the whole part of your own trademarks;

  • in connection with activities, products or services which are not ours;

  • in a manner which may be confusing, misleading or deceptive;

  • in a manner that disparages us or our information, products or services (including this web site).

All Harley Davidson® Inc trademarks mentioned in this site are intended to be for descriptive purposes only and not to imply that they are endorsed by Harley Davidson® Inc. The words, Buddy Seat, Disc Glide, Dyna Glide, Electra Glide, Evolution, Fat Boy, HD, H-D, Harley, Harley-Davidson Heritage Softail, Heritage Springer, Hugger, Low Rider, Night Train, Road Glide, Road King, Roadster, Softail, Softail Deuce, Sport Glide, Sportster, Springer, Sturgis, Super Glide, Tour-Pak, Tour Glide, Ultra Classic and Wide Glide are registered trademarks of Harley-Davidson, Inc., Milwaukee, Wisconsin, U.S.A. The words, Bad Boy, Convertible, Duo Glide, Hydra Glide, V-Fire III and VROD are trademarks of Harley Davidson® Inc., Milwaukee, Wisconsin, U.S.A.

The following model designations for Harley Davidson® motorcycles are used in this website for reference only: EL, FL, FLH, FLHR, FLHRCI, FLHS, FLHT, FLHTC, FLHTC Ultra Classic, FLHTC-I, FLHTCUI, FLHX, FLST, FLSTC, FLSTF, FLSTN, FLSTS, FLSTSC/I, FLT, FLTC, FLTC Ultra Classic, FLTCU, FLTR, FLTRI, FLTRSEI, FX, FXB, FXD, FXDB, FXDC, FXDG, FXDL, FXDS-CON, FXDWG, FXDX, FXDXT, FXE, FXEF, FXLR, FXR, FXRC, FXRD, FXRDG, FXRP, FXRS, FXRS-CON, FXRSE, FXRS-SP, FXRT, FXS, FXSB, FXST, FXSTB, FXSTC, FXSTD, FXSTD-I, FXSTS, FXSTSB, FXWG, GE, K, KH, VROD, VRSCA, VRSCB, WL, WLA, XL, XL1100, XL1200, XL1200C, XL1200R, XL1200S, XL883, XL883C, XL883R, XLCH, XLCR, XLH, XLH1100, XLH1200, XLH1200, XLH1200S, XLH883, XLR, XLS, XLS, XLT, XLX, XLX, XR1000.

Responsibility for the content of advertisements appearing on this web site (including hyperlinks to advertisers’ own web sites) rests solely with the advertisers. The placement of such advertisements does not constitute a recommendation or endorsement by us of the advertisers’ products and each advertiser is solely responsible for any representations made in connection with its advertisement.

Website designed by
Web Designs Australia
Visit our Website